Delphi Fountain

The Delphi Fountain is the perfect center piece for your home or garden. Beautiful from every angle, the Delphi Fountain has two water features. Water pours down over the ridged plates of both sides of the fountain, cascading down under basin below! While water bubbles up from the center of the fountain too. This fountain will make a lovely addition to your garden setting!

Shown in the Alpine Stone (AS) Patina (Color), this fountain is available in your choice of classic and distinct patinas.

Proudly constructed in the USA from premium cast stone concrete.
Includes variable speed, U.L. listed, recirculating fountain pump. Cord is black, 5-6 feet long, and plugs into any standard 3-prong 110v electrical outlet. Cord comes out of the back of the base of the fountain. An outdoor-rated extension cord can be used to lengthen the cord.
TheDelphi Fountain is 41″ tall by 19″ wide 47.75″ long. Total weight is 743 pounds.
Specific assembly instructions are included with the fountain.
Ships approximately 2 weeks from order date.
Your fountain will arrive securely packed on a pallet. The truck driver will use a lift gate to place your palletized Delphi Fountain on your property, but cannot assist with final placement or installation.
Winter Care Information: Protect all fountains from freeze-thaw cycles. All cast stone, including cast stone concrete, is slightly porous, which allows very small amounts of moisture to absorb into the surface of the fountain over time. If this moisture freezes, it can cause small cracks or chips. The fountain may be left in severe freezing weather, provided it is covered and/or dry. It is recommended that the pump be brought indoors during periods of freezing weather.
Placement: Always place fountains on a solid, level foundation, for instance concrete, patio, or deck. If the fountain is to be placed on softer ground, two inches of level pea gravel or packed sand will provide your fountain a solid, long term foundation.